How to Flash Swipe Float Tab X78 using Phoenix USB Pro

These are the instructions to Swipe Float Tab X78 Smart-Phones Re-Flash Stock Rom and firmware Flash Installation Guide using Phoenix USB Pro. it is a quick guide for Flash Swipe Float Tab X78 using Phoenix USB Pro. This method is known for emergency recovery in an event if fail boot or firmware corruption experienced on your Swipe Float Tab X78 android device.

Flash Swipe Float Tab X78 firmware using Phoenix USB Pro

Follow Requirements:-
* Be careful Read steps by steps method, then do it.
* Make a backup all file of your Swipe Float Tab X78 Android device.
* Battery should charge 40%-60% minimum.
* This tutorial works only with the .img format firmware only.

Steps to Swipe Float Tab X78 Flashing Process

Step 1: Download Swipe Float Tab X78 USB Driver and install the USB Driver for your Swipe Float Tab X78 device on your Windows PC.
(if you already installed the USB drivers for your Swipe Float Tab X78 Device support then SKIP this “step 1”).

Step 2: Download letest versions Phoenix USB Pro and extract on your Windows PC.

Phoenix USB Pro tool for Swipe Float Tab X78

Step 3: Power Off your Swipe Float Tab X78 Android Device.

Step 4: Download the Swipe Float Tab X78 Stock Rom (firmware) file that you want to Flashing on your Swipe Float Tab X78 Android Device and extract file in a folder(it on your PC).

Step 5: Now open folder file (you have extracted this file) on Your PC, Double click on PhoenixUSBPro.exe.

open folder Phoenix USB Pro on flashing Swipe Float Tab X78

Step 6: Run and launched Phoenix USB Pro on Your PC, Click on the top left Key Button and select the key file that comes with the Phoenix USB Pro folder (Phoenix.Key) on Your PC.

flash Swipe Float Tab X78 then Open and select Phoenix USB Pro key

Step 7: Click on the Image button option and select the firmware.img file in the Swipe Float Tab X78 firmware (Stock Rom) folder you have downloaded.

Phoenix USB Pro Select img firmware for Swipe Float Tab X78

Step 8: Click on Start button then flashing process start.

Phoenix USB Pro Start flash process on Swipe Float Tab X78

Step 9: if you will be able to view a Big Green Tick Mark icon on the right side which means everything is ok to flash the Swipe Float Tab X78 firmware.

Step 10: So, Switch off your Swipe Float Tab X78 Device After then Press and hold Volume Down key and connect your Swipe Float Tab X78 Android Device to the PC using the USB cable.

Step 11: Now, holding the Volume Key and Tap on the Power Buttons 3 (three) times then release the Volume Down Key bottom.

Step 12: When you connect your Device then Phoenix Pro will detect your Swipe Float Tab X78 device automatically (show green bar), the automatically begin Flashing process.

Step 13: When Flashing process will complete, then you will see Finish message in the Phoenix USB pro.

Swipe Float Tab X78 Flashing process will complete with phoenix usb pro tool

Step 14: Now, Disconnect your Swipe Float Tab X78 Device from the PC and close Phoenix USB Pro application.

This is simple and easy flashing process for your Swipe Float Tab X78 android device. I can try to make it easy method and make all steps clear and try to image with the tutorial all step for you. If your feel any problem then please comment us . I try to best resolve your problem.

Read more:

* In case you are Swipe Float Tab X78 device not connect PC while be flashing process, it means USB drivers do not work then download android driver click here.

* Alternative Flashing Tool: if you looking the best alternative tool to the Phoenix USB Pro then Download PhoenixSuit tool.

* Please make a backup of your Swipe Float Tab X78 android device before updating ROM / flashing process your personal data will be removed using the Phoenix USB Pro.

Total Views: 285 ,